※1… The difference in the amount of bubble generation measured before and after the water flow (used water: ion exchange water, water temperature: 40±1°C, discharge water flow rate: 12.6 L/min) (the value fluctuates depending on the water quality, environment, and time of year). Measuring instrument: Average value based on a total of 5 measurements using the NS300 nanosite manufactured by Malvern Panalytical in accordance with the Fine Bubble Industry Association standard “Test Method for Fine Bubble Shower Heads (FBIA 3-1-1:2019)” (measured by a third-party organization on March 16, 2022). Ultrafine bubble: average diameter 0.22 μm, mode diameter 0.20 μm

The water swirls around the inside of the shower head and passes through the center, creating a gentle shower with maximum air intake. The swirling flow is strengthened by the 8 fins and 5 fins, and the air is refined by the swirling flow and discharged into an ultrafine bubble*2 of about 0.0002 mm.

*2…”Fine Bubble”, “Ultra Fine Bubble”, “FINE BUBBLE” and “FBIA” logos are registered trademarks of the Fine Bubble Industry Association.

You can turn the bubble shower on and off at hand.

You can turn the water on and off at hand.

It saves about 40% of water, which can also save you money on your utility bills.

※3… Using our product [Product No.JSB025BW] Air Beat Shower Pita (56 shower hole diameters× 0.9 mm) and our product [Product number: ] Air Beat Shower Pita (shower hole diameter 0.9 mm×56 pieces), a water flow (discharge flow rate 8±0.2 L/min, water temperature 38±1 °C) is applied to artificial skin with a thin layer of simulated dirt (a mixture of foundation 1: makeup remover 0.15 pieces) and water flow from a distance of 100 mm (discharge water flow rate 80.2 L/min, water temperature 381 °C) for 10 seconds, dried in a 30°C environment for 30 minutes, and then the weight of the artificial skin is measured, and the stain removal rate (= amount of dirt removed / pseudo dirt applied ×100) is calculated. Comparison of the average values of each of the 12 tests. (Measured by Takagi on May 30, 2022) The effect varies depending on the water quality, environment, and type of foundation and makeup remover.

※4… In 15 subjects, hands were washed with soap, wiped with a towel, and left in a room at 22±2 ° C. for 20 minutes. After applying the Kimochii Bubble Shawa Pita to the back of the hand from a distance of 30 cm at a water temperature of 37±2 ° C and a discharge water flow rate of 8±0.2 L/min, the moisture content of the skin was measured immediately after wiping it off with a towel. Calculated as the rate of increase in water content = {after shower use (n = 15 average value) / before shower use (n = 15 average value) -1}× 100. Measuring instrument: Courage+Khazaka “Corneometer CM825MP” (measured at Takagi on May 11, 2022)

※5… In 15 subjects, hands were washed with soap, wiped with a towel, and left in a room at 22±2 ° C. for 20 minutes. After applying the Creepy Bubble Shawa Pita to the back of the hand from a distance of 30 cm at a water temperature of 37±2 ° C and a discharge water flow rate of 8±0.2 L/min, the skin surface temperature (maximum value) was measured immediately after wiping it off with a towel. Surface temperature difference = calculated after shower use (n = 15 average value) – before shower use (n = 15 average value). Measuring instrument: Thermography camera FLIR (measured at Takagi on May 11, 2022)

Easy to install without tools.

Light and compact with a size that is easy to hold.

The chlorine removal capsule Miz-e cannot be installed.

The chlorine removal capsule Miz-e cannot be installed.

If the water cannot be shut off with the switching lever, please purchase a check valve adapter (part number: JS431) sold separately to prevent backflow.

Please check the type of faucet in your home before ordering. Some faucets cannot be installed.